1.搭建Hadoop实验平台

奔跑的猫哥 2021-01-22 09:08:01
hadoop 实验 搭建 平台


节点功能规划

操作系统:CentOS7.2(1511)

Java JDK版本:jdk-8u65-linux-x64.tar.gz

Hadoop版本:hadoop-2.8.3.tar.gz

下载地址:

链接:https://pan.baidu.com/s/1iQfjO-d2ojA6mAeOOKb6CA
提取码:l0qp
node1 node2 node3
NameNode ResourceManage
DataNode DataNode DataNode
NodeManager NodeManager NodeManager
HistoryServer SecondaryNameNode

配置主机IP地址和主机名称

三始主机分别命名为:node1,node2,node3,IP地址和主机名称对应关系如下:

序号 主机名 IP地址 备注
1 node1 192.168.100.11 主节点
2 node2 192.168.100.12 从节点
3 node3 192.168.100.13 从节点

修改主机名

在三个节点上分别执行修改主机名的命令:

node1:

[root@localhost ~]# hostnamectl set-hostname node1

node2:

[root@localhost ~]# hostnamectl set-hostname node2

node3:

[root@localhost ~]# hostnamectl set-hostname node3

按ctrl+d快捷键或输入exit,退出终端,重新登录后,查看主机名,如下图所示:

image-20210121191713446

修改IP地址

以node1节点为例,在三个节点执行修改IP地址的操作(注意网卡名称因机器的不同可能不一样,例如,node1的网卡名为:eno16777736):

[root@node1 ~]# vi /etc/sysconfig/network-scripts/ifcfg-eno16777736

将node1,node2,node3节点的IP地址分别设置为:192.168.100.11,192.168.100.12,192.168.100.13

image-20210121192437937

修改主机映射

在三个节点分别执行如下操作,添加主机名和IP地址的映射关系:

[root@node1 ~]# vi /etc/hosts

image-20210121195138068

配置节点主机之间的免密登录

生成本节点公钥

在node1,node2,node3三个节点上分别执行生成密钥的命令(遇到选择项,直接按回国键Enter):

[root@node1 ~]# ssh-keygen

image-20210121194454019

进入.ssh目录,查看生成的公钥:

[root@node1 ~]# cd ~/.ssh/
[root@node1 .ssh]# ls
id_rsa id_rsa.pub

拷贝公钥

将生成的公钥拷贝至节点(包括自身节点):

node1节点:

[root@node1 .ssh]# ssh-copy-id -i id_rsa.pub root@node1
The authenticity of host 'node1 (192.168.100.11)' can't be established.
ECDSA key fingerprint is e1:6c:f3:7f:be:79:dc:87:15:97:51:4d:e5:b4:56:78.
Are you sure you want to continue connecting (yes/no)? yes
/usr/bin/ssh-copy-id: INFO: attempting to log in with the new key(s), to filter out any that are already installed
/usr/bin/ssh-copy-id: INFO: 1 key(s) remain to be installed -- if you are prompted now it is to install the new keys
root@node1's password:
Number of key(s) added: 1
Now try logging into the machine, with: "ssh 'root@node1'"
and check to make sure that only the key(s) you wanted were added.
[root@node1 .ssh]# ssh-copy-id -i id_rsa.pub root@node2
The authenticity of host 'node2 (192.168.100.12)' can't be established.
ECDSA key fingerprint is e1:6c:f3:7f:be:79:dc:87:15:97:51:4d:e5:b4:56:78.
Are you sure you want to continue connecting (yes/no)? yes
/usr/bin/ssh-copy-id: INFO: attempting to log in with the new key(s), to filter out any that are already installed
/usr/bin/ssh-copy-id: INFO: 1 key(s) remain to be installed -- if you are prompted now it is to install the new keys
root@node2's password:
Number of key(s) added: 1
Now try logging into the machine, with: "ssh 'root@node2'"
and check to make sure that only the key(s) you wanted were added.
[root@node1 .ssh]# ssh-copy-id -i id_rsa.pub root@node3
The authenticity of host 'node3 (192.168.100.13)' can't be established.
ECDSA key fingerprint is e1:6c:f3:7f:be:79:dc:87:15:97:51:4d:e5:b4:56:78.
Are you sure you want to continue connecting (yes/no)? yes
/usr/bin/ssh-copy-id: INFO: attempting to log in with the new key(s), to filter out any that are already installed
/usr/bin/ssh-copy-id: INFO: 1 key(s) remain to be installed -- if you are prompted now it is to install the new keys
root@node3's password:
Number of key(s) added: 1
Now try logging into the machine, with: "ssh 'root@node3'"
and check to make sure that only the key(s) you wanted were added.

node2节点:

[root@node2 .ssh]# ssh-copy-id -i id_rsa.pub root@node1
The authenticity of host 'node1 (192.168.100.11)' can't be established.
ECDSA key fingerprint is e1:6c:f3:7f:be:79:dc:87:15:97:51:4d:e5:b4:56:78.
Are you sure you want to continue connecting (yes/no)? yes
/usr/bin/ssh-copy-id: INFO: attempting to log in with the new key(s), to filter out any that are already installed
/usr/bin/ssh-copy-id: INFO: 1 key(s) remain to be installed -- if you are prompted now it is to install the new keys
root@node1's password:
Number of key(s) added: 1
Now try logging into the machine, with: "ssh 'root@node1'"
and check to make sure that only the key(s) you wanted were added.
[root@node2 .ssh]# ssh-copy-id -i id_rsa.pub root@node2
The authenticity of host 'node2 (192.168.100.12)' can't be established.
ECDSA key fingerprint is e1:6c:f3:7f:be:79:dc:87:15:97:51:4d:e5:b4:56:78.
Are you sure you want to continue connecting (yes/no)? yes
/usr/bin/ssh-copy-id: INFO: attempting to log in with the new key(s), to filter out any that are already installed
/usr/bin/ssh-copy-id: INFO: 1 key(s) remain to be installed -- if you are prompted now it is to install the new keys
root@node2's password:
Number of key(s) added: 1
Now try logging into the machine, with: "ssh 'root@node2'"
and check to make sure that only the key(s) you wanted were added.
[root@node2 .ssh]# ssh-copy-id -i id_rsa.pub root@node3
The authenticity of host 'node3 (192.168.100.13)' can't be established.
ECDSA key fingerprint is e1:6c:f3:7f:be:79:dc:87:15:97:51:4d:e5:b4:56:78.
Are you sure you want to continue connecting (yes/no)? yes
/usr/bin/ssh-copy-id: INFO: attempting to log in with the new key(s), to filter out any that are already installed
/usr/bin/ssh-copy-id: INFO: 1 key(s) remain to be installed -- if you are prompted now it is to install the new keys
root@node3's password:
Number of key(s) added: 1
Now try logging into the machine, with: "ssh 'root@node3'"
and check to make sure that only the key(s) you wanted were added.

node3节点:

[root@node3 .ssh]# ssh-copy-id -i id_rsa.pub root@node1
The authenticity of host 'node1 (192.168.100.11)' can't be established.
ECDSA key fingerprint is e1:6c:f3:7f:be:79:dc:87:15:97:51:4d:e5:b4:56:78.
Are you sure you want to continue connecting (yes/no)? yes
/usr/bin/ssh-copy-id: INFO: attempting to log in with the new key(s), to filter out any that are already installed
/usr/bin/ssh-copy-id: INFO: 1 key(s) remain to be installed -- if you are prompted now it is to install the new keys
root@node1's password:
Number of key(s) added: 1
Now try logging into the machine, with: "ssh 'root@node1'"
and check to make sure that only the key(s) you wanted were added.
[root@node3 .ssh]# ssh-copy-id -i id_rsa.pub root@node2
The authenticity of host 'node2 (192.168.100.12)' can't be established.
ECDSA key fingerprint is e1:6c:f3:7f:be:79:dc:87:15:97:51:4d:e5:b4:56:78.
Are you sure you want to continue connecting (yes/no)? yes
/usr/bin/ssh-copy-id: INFO: attempting to log in with the new key(s), to filter out any that are already installed
/usr/bin/ssh-copy-id: INFO: 1 key(s) remain to be installed -- if you are prompted now it is to install the new keys
root@node2's password:
Number of key(s) added: 1
Now try logging into the machine, with: "ssh 'root@node2'"
and check to make sure that only the key(s) you wanted were added.
[root@node3 .ssh]# ssh-copy-id -i id_rsa.pub root@node3
The authenticity of host 'node3 (192.168.100.13)' can't be established.
ECDSA key fingerprint is e1:6c:f3:7f:be:79:dc:87:15:97:51:4d:e5:b4:56:78.
Are you sure you want to continue connecting (yes/no)? yes
/usr/bin/ssh-copy-id: INFO: attempting to log in with the new key(s), to filter out any that are already installed
/usr/bin/ssh-copy-id: INFO: 1 key(s) remain to be installed -- if you are prompted now it is to install the new keys
root@node3's password:
Number of key(s) added: 1
Now try logging into the machine, with: "ssh 'root@node3'"
and check to make sure that only the key(s) you wanted were added.

测试免密登录

在三个节点上分别执行命令,访问相关节点(含自身节点),如果不需要输入密码进行身份验证,则表示成功(以node3节点上的操作为例):

[root@node3 .ssh]# ssh node1
Last login: Thu Jan 21 11:32:29 2021 from 192.168.100.1
[root@node1 ~]# exit
logout
Connection to node1 closed.
[root@node3 .ssh]# ssh node2
Last login: Thu Jan 21 16:01:47 2021 from node1
[root@node2 ~]# exit
logout
Connection to node2 closed.
[root@node3 .ssh]# ssh node3
Last login: Thu Jan 21 16:01:59 2021 from node1
[root@node3 ~]# exit
logout
Connection to node3 closed.

关闭防火墙

三个节点都要执行:

[root@node1 .ssh]# systemctl stop firewalld
[root@node1 .ssh]# systemctl disable firewalld
Removed symlink /etc/systemd/system/dbus-org.fedoraproject.FirewallD1.service.
Removed symlink /etc/systemd/system/basic.target.wants/firewalld.service.

设置Selinux

三个节点都要设置selinux为disabled:

[root@node1 ~]# vi /etc/selinux/config

image-20210121203234663

将selinux设置为disabled后,需要重启机器生效,也可以执行如下命令,将selinux设置为permissive(同样也要在三个节点操作):

[root@node1 ~]# setenforce 0
[root@node1 ~]# getenforce
Permissive

配置Java环境

在node1节点下创建目录/opt/jdk,将jdk包上传至此目录:

[root@node1 ~]# mkdir -p /opt/jdk
[root@node1 ~]# cd /opt/jdk
[root@node1 jdk]# ls
jdk-8u65-linux-x64.tar.gz

解压缩jdk-8u65-linux-x64.tar.gz至当前目录,完成后删除压缩包:

[root@node1 jdk]# tar zxvf jdk-8u65-linux-x64.tar.gz
[root@node1 jdk]# rm -f jdk-8u65-linux-x64.tar.gz

修改/etc/profile文件,添加Java环境配置信息:

[root@node1 jdk]# vi /etc/profile
#Java Start
export JAVA_HOME=/opt/jdk/jdk1.8.0_65
export PATH=$PATH:${JAVA_HOME}/bin
export CLASSPATH=.:${JAVA_HOME}/jre/lib/rt.jar:${JAVA_HOME}/lib/dt.jar:${JAVA_HOME}/lib/tools.jar
#Java End

使用Java环境配置信息生效:

[root@node1 jdk]# source /etc/profile
[root@node1 jdk]# java -version
java version "1.8.0_65"
Java(TM) SE Runtime Environment (build 1.8.0_65-b17)
Java HotSpot(TM) 64-Bit Server VM (build 25.65-b01, mixed mode)

配置Hadoop环境

在node1节点下创建目录/opt/hadoop,将hadoop包上传至此目录:

[root@node1 ~]# mkdir -p /opt/hadoop
[root@node1 ~]# cd /opt/hadoop/
[root@node1 hadoop]# ls
hadoop-2.8.3.tar.gz

解压缩hadoop-2.8.3.tar.gz至当前目录,完成后删除压缩包:

[root@node1 hadoop]# tar zxvf hadoop-2.8.3.tar.gz
[root@node1 hadoop]# rm -f hadoop-2.8.3.tar.gz

添加Java环境信息

依次修改etc目录下 hadoop-env.sh、mapred-env.sh、yarn-env.sh文件中的JDK路径,将其分别指向/opt/jdk/jdk1.8.0_65/,注意在编辑配置文件时,先把# export前的符号”#“去掉:

[root@node1 ~]# cd /opt/hadoop/hadoop-2.8.3/etc/hadoop/
[root@node1 hadoop]# vi hadoop-env.sh

image-20210121211337260

[root@node1 hadoop]# vi mapred-env.sh

image-20210121211846828

[root@node1 hadoop]# vi yarn-env.sh

image-20210121211714422

配置core-site.xml

在三个节点上分别创建hadoop临时目录/opt/datas/tmp:

[root@node1 ~]# mkdir -p /opt/datas/tmp
[root@node2 ~]# mkdir -p /opt/datas/tmp
[root@node3 ~]# mkdir -p /opt/datas/tmp

在node1节点上修改core-site.xml配置信息:

[root@node1 ~]# vi /opt/hadoop/hadoop-2.8.3/etc/hadoop/core-site.xml

添加如下内容:

<configuration>
<property>
<!-- NameNode主机地址及端口号 -->
<name>fs.defaultFS</name>
<value>hdfs://node1:8020</value>
</property>
<!-- hadoop临时目录的地址 -->
<property>
<name>hadoop.tmp.dir</name>
<value>/home/hadoop/data/tmp</value>
</property>
</configuration>

配置hdfs-site.xml

在三个节点分别创建好存放NameNode数据的目录/opt/datas/dfs/namenode,以及存入DataNode数据的目录/opt/datas/dfs/datanode(以node1上的操作为例,node2和node3上的操作相同):

[root@node1 ~]# mkdir -p /opt/datas/dfs/namenode
[root@node1 ~]# mkdir -p /opt/datas/dfs/datanode

编辑hdfs-site.xml文件,配置相关信息:

[root@node1 ~]# vi /opt/hadoop/hadoop-2.8.3/etc/hadoop/hdfs-site.xml
<configuration>
<!-- 指定创建的副本数 -->
<property>
<name>dfs.replication</name>
<value>3</value>
</property>
<!-- 指定SecondaryNameNode的地址和端口号,将node2作为SecondaryNameNode服务器 -->
<property>
<name>dfs.namenode.secondary.http-address</name>
<value>node2:50090</value>
</property>
<!-- NameNode 数据存放路径 -->
<property>
<name>dfs.namenode.name.dir</name>
<value>/opt/datas/dfs/namenode</value>
</property>
<!-- DataNode 数据存放路径 -->
<property>
<name>dfs.datanode.data.dir</name>
<value>/opt/datas/dfs/datanode</value>
</property>
</configuration>

配置slaves

slaves文件用于指定hdfs DataNode 工作节点,编辑slaves文件:

[root@node1 ~]# vi /opt/hadoop/hadoop-2.8.3/etc/hadoop/slaves

将文件内容修改为:

image-20210121223526312

配置yarn-site.xml

编辑yarn-site.xml文件:

[root@node1 ~]# vi /opt/hadoop/hadoop-2.8.3/etc/hadoop/yarn-site.xml

修改文件内容:

<configuration>
<!-- NodeManager上运行的附属服务,需配置成mapreduce_shuffle,才能运行MapReduce程序 -->
<property>
<name>yarn.nodemanager.aux-services</name>
<value>mapreduce_shuffle</value>
</property>
<!-- 指定ResourceManager服务器-->
<property>
<name>yarn.resourcemanager.hostname</name>
<value>node2</value>
</property>
<!-- 配置是否启用日志聚集功能 -->
<property>
<name>yarn.log-aggregation-enable</name>
<value>true</value>
</property>
<!-- 配置聚集的日志在hdfs上最长保存时间 -->
<property>
<name>yarn.log-aggregation.retain-seconds</name>
<value>106800</value>
</property>
</configuration>

配置mapred-site.xml

以mapred-site.xml.template为模板,复制一个mapred-site.xml文件:

[root@node1 ~]# cp /opt/hadoop/hadoop-2.8.3/etc/hadoop/mapred-site.xml.template /opt/hadoop/hadoop-2.8.3/etc/hadoop/mapred-site.xml

编辑mapred-site.xml文件:

[root@node1 ~]# vi /opt/hadoop/hadoop-2.8.3/etc/hadoop/mapred-site.xml
<configuration>
<!-- 设置mapreduce任务运行在yarn上 -->
<property>
<name>mapreduce.framework.name</name>
<value>yarn</value>
</property>
<!-- 设置mapreduce历史服务器地址及端口号 -->
<property>
<name>mapreduce.jobhistory.address</name>
<value>node1:10020</value>
</property>
<!-- 设置mapreduce历史服务器的web页面地址和端口号 -->
<property>
<name>mapreduce.jobhistory.webapp.address</name>
<value>node1:19888</value>
</property>
</configuration>

在profile文件中配置hadoop环境信息

编辑环境配置文件/etc/profile:

[root@node1 ~]# vi /etc/profile
#Hadoop Start
export HADOOP_HOME=/opt/hadoop/hadoop-2.8.3
export PATH=$PATH:${HADOOP_HOME}/bin:${HADOOP_HOME}/sbin
#Hadoop End

让环境配置信息生效:

[root@node1 ~]# source /etc/profile

分发内容至节点

在node2,node3节点上创建目录/opt/jdk,/opt/hadoop:

[root@node2 ~]# mkdir -p /opt/jdk
[root@node2 ~]# mkdir -p /opt/hadoop

分发jdk至node2,node3:

[root@node1 ~]# scp -r /opt/jdk/jdk1.8.0_65/ node2:/opt/jdk
[root@node1 ~]# scp -r /opt/jdk/jdk1.8.0_65/ node3:/opt/jdk

分发hadoop至node2,node3:

[root@node1 ~]# scp -r /opt/hadoop/hadoop-2.8.3/ node2:/opt/hadoop
[root@node1 ~]# scp -r /opt/hadoop/hadoop-2.8.3/ node3:/opt/hadoop

分发profile至node2,node3:

[root@node1 ~]# scp /etc/profile node2:/etc/profile
[root@node1 ~]# scp /etc/profile node3:/etc/profile

在node2,node3节点上执行命令使配置生效:

node2:

[root@node2 ~]# source /etc/profile

node3:

[root@node3 ~]# source /etc/profile

格式化NameNode

如果需要重新格式化NameNode,需要先将原来NameNode和DataNode下的文件全部删,不然会报错,因为每次格式化,默认是创建一个集群ID,并写入NameNode和DataNode的VERSION文件中(VERSION文件所在目录为dfs/namenode/current 和 dfs/datanode/current),重新格式化时,默认会生成一个新的集群ID,如果不删除原来的目录,会导致NameNode中的VERSION文件中是新的集群ID,而DataNode中是旧的集群ID,从而不一致,导致报错,另一种方法是格式化时指定集群ID参数,指定为旧的集群ID。
NameNode和DataNode所在目录是在hdfs-site.xml中dfs.namenode.name.dir、dfs.datanode.data.dir所配置。

[root@node1 ~]# cd /opt/hadoop/hadoop-2.8.3/bin/
[root@node1 bin]# ./hdfs namenode -format

image-20210121232343453

启动集群

启动HDFS

[root@node1 ~]# cd /opt/hadoop/hadoop-2.8.3/sbin/
[root@node1 sbin]# ./start-dfs.sh
Starting namenodes on [node1]
node1: starting namenode, logging to /opt/hadoop/hadoop-2.8.3/logs/hadoop-root-namenode-node1.out
node3: starting datanode, logging to /opt/hadoop/hadoop-2.8.3/logs/hadoop-root-datanode-node3.out
node2: starting datanode, logging to /opt/hadoop/hadoop-2.8.3/logs/hadoop-root-datanode-node2.out
node1: starting datanode, logging to /opt/hadoop/hadoop-2.8.3/logs/hadoop-root-datanode-node1.out
Starting secondary namenodes [node2]
node2: starting secondarynamenode, logging to /opt/hadoop/hadoop-2.8.3/logs/hadoop-root-secondarynamenode-node2.out
[root@node1 sbin]#

jps 命令查看进程启动情况,能看到node1节点启动了 NameNode 和 DataNode进程。

[root@node1 sbin]# jps
1588 NameNode
1717 DataNode
1930 Jps

启动YARN

在node2节点上执行命令:

[root@node2 ~]# cd /opt/hadoop/hadoop-2.8.3/sbin/
[root@node2 sbin]# ./start-yarn.sh
starting yarn daemons
starting resourcemanager, logging to /opt/hadoop/hadoop-2.8.3/logs/yarn-root-resourcemanager-node2.out
node3: starting nodemanager, logging to /opt/hadoop/hadoop-2.8.3/logs/yarn-root-nodemanager-node3.out
node1: starting nodemanager, logging to /opt/hadoop/hadoop-2.8.3/logs/yarn-root-nodemanager-node1.out
node2: starting nodemanager, logging to /opt/hadoop/hadoop-2.8.3/logs/yarn-root-nodemanager-node2.out
[root@node2 sbin]#

jps 命令查看进程启动情况,能看到node2节点启动了ResourceManager进程:

[root@node2 sbin]# jps
2629 NodeManager
2937 Jps
1434 DataNode
1531 SecondaryNameNode
2525 ResourceManager
[root@node2 sbin]#

注意,如果不在ResourceManager主机上运行 $HADOOP_HOME/sbin/start-yarn.sh 命令的话,ResourceManager 进程将不会启动,需要到 ResourceManager 主机上执行./yarn-daemon.sh start resourcemanager 命令来启动ResourceManager进程。

启动日志服务器

在node1节点上启动MapReduce日志服务:

[root@node1 sbin]# ./mr-jobhistory-daemon.sh start historyserver
starting historyserver, logging to /opt/hadoop/hadoop-2.8.3/logs/mapred-root-historyserver-node1.out
[root@node1 sbin]#

jps 命令查看进程启动情况,能看到node1节点启动了JobHistoryServer进程:

[root@node1 sbin]# jps
1588 NameNode
1717 DataNode
2502 Jps
2462 JobHistoryServer
2303 NodeManager
[root@node1 sbin]#

查看HDFS Web页面

地址为 NameNode 进程运行主机ip,端口为50070(网址:http://192.168.100.11:50070):

image-20210121234119461

查看YARN Web页面

地址为node2主机ip,端口号为:8088(网址:http://192.168.100.12:8088

image-20210121234304905

查看JobHistory Web 页面

地址为node1主机ip,端口号为:19888(网址:http://192.168.100.11:19888/jobhistory)

image-20210121234541746

测试案例(使用分词工具统计样本词频)

在node1节点上准备样本文件

[root@node1 ~]# vi example.txt

在example.txt文件中添加如下内容:

hadoop mapreduce hive
hbase spark storm
sqoop hadoop hive
spark hadoop

在hdfs中创建输入目录/datas/input

[root@node1 ~]# hadoop fs -mkdir -p /datas/input

将样本文件example.txt上传至hdfs目录中

[root@node1 ~]# hadoop fs -put ~/example.txt /datas/input

运行hadoop自带的mapreduce Demo程序

[root@node1 ~]# hadoop jar /opt/hadoop/hadoop-2.8.3/share/hadoop/mapreduce/hadoop-mapreduce-examples-2.8.3.jar wordcount /datas/input/example.txt /datas/output

image-20210122000546399

查看输出文件

[root@node1 ~]# hadoop fs -cat /datas/output/part-r-00000
hadoop 3
hbase 1
hive 2
mapreduce 1
spark 2
sqoop 1
storm 1
[root@node1 ~]#
版权声明
本文为[奔跑的猫哥]所创,转载请带上原文链接,感谢
https://www.cnblogs.com/zxzkb/p/14311440.html

  1. 【计算机网络 12(1),尚学堂马士兵Java视频教程
  2. 【程序猿历程,史上最全的Java面试题集锦在这里
  3. 【程序猿历程(1),Javaweb视频教程百度云
  4. Notes on MySQL 45 lectures (1-7)
  5. [computer network 12 (1), Shang Xuetang Ma soldier java video tutorial
  6. The most complete collection of Java interview questions in history is here
  7. [process of program ape (1), JavaWeb video tutorial, baidu cloud
  8. Notes on MySQL 45 lectures (1-7)
  9. 精进 Spring Boot 03:Spring Boot 的配置文件和配置管理,以及用三种方式读取配置文件
  10. Refined spring boot 03: spring boot configuration files and configuration management, and reading configuration files in three ways
  11. 精进 Spring Boot 03:Spring Boot 的配置文件和配置管理,以及用三种方式读取配置文件
  12. Refined spring boot 03: spring boot configuration files and configuration management, and reading configuration files in three ways
  13. 【递归,Java传智播客笔记
  14. [recursion, Java intelligence podcast notes
  15. [adhere to painting for 386 days] the beginning of spring of 24 solar terms
  16. K8S系列第八篇(Service、EndPoints以及高可用kubeadm部署)
  17. K8s Series Part 8 (service, endpoints and high availability kubeadm deployment)
  18. 【重识 HTML (3),350道Java面试真题分享
  19. 【重识 HTML (2),Java并发编程必会的多线程你竟然还不会
  20. 【重识 HTML (1),二本Java小菜鸟4面字节跳动被秒成渣渣
  21. [re recognize HTML (3) and share 350 real Java interview questions
  22. [re recognize HTML (2). Multithreading is a must for Java Concurrent Programming. How dare you not
  23. [re recognize HTML (1), two Java rookies' 4-sided bytes beat and become slag in seconds
  24. 造轮子系列之RPC 1:如何从零开始开发RPC框架
  25. RPC 1: how to develop RPC framework from scratch
  26. 造轮子系列之RPC 1:如何从零开始开发RPC框架
  27. RPC 1: how to develop RPC framework from scratch
  28. 一次性捋清楚吧,对乱糟糟的,Spring事务扩展机制
  29. 一文彻底弄懂如何选择抽象类还是接口,连续四年百度Java岗必问面试题
  30. Redis常用命令
  31. 一双拖鞋引发的血案,狂神说Java系列笔记
  32. 一、mysql基础安装
  33. 一位程序员的独白:尽管我一生坎坷,Java框架面试基础
  34. Clear it all at once. For the messy, spring transaction extension mechanism
  35. A thorough understanding of how to choose abstract classes or interfaces, baidu Java post must ask interview questions for four consecutive years
  36. Redis common commands
  37. A pair of slippers triggered the murder, crazy God said java series notes
  38. 1、 MySQL basic installation
  39. Monologue of a programmer: despite my ups and downs in my life, Java framework is the foundation of interview
  40. 【大厂面试】三面三问Spring循环依赖,请一定要把这篇看完(建议收藏)
  41. 一线互联网企业中,springboot入门项目
  42. 一篇文带你入门SSM框架Spring开发,帮你快速拿Offer
  43. 【面试资料】Java全集、微服务、大数据、数据结构与算法、机器学习知识最全总结,283页pdf
  44. 【leetcode刷题】24.数组中重复的数字——Java版
  45. 【leetcode刷题】23.对称二叉树——Java版
  46. 【leetcode刷题】22.二叉树的中序遍历——Java版
  47. 【leetcode刷题】21.三数之和——Java版
  48. 【leetcode刷题】20.最长回文子串——Java版
  49. 【leetcode刷题】19.回文链表——Java版
  50. 【leetcode刷题】18.反转链表——Java版
  51. 【leetcode刷题】17.相交链表——Java&python版
  52. 【leetcode刷题】16.环形链表——Java版
  53. 【leetcode刷题】15.汉明距离——Java版
  54. 【leetcode刷题】14.找到所有数组中消失的数字——Java版
  55. 【leetcode刷题】13.比特位计数——Java版
  56. oracle控制用户权限命令
  57. 三年Java开发,继阿里,鲁班二期Java架构师
  58. Oracle必须要启动的服务
  59. 万字长文!深入剖析HashMap,Java基础笔试题大全带答案
  60. 一问Kafka就心慌?我却凭着这份,图灵学院vip课程百度云